2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 80Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 80

17Remove the two Phillips-head cap screws securing the strainer InspectingMeasuring Clutch Driven Plate Warpage 1Inspect each driven plate for warpage and burn marks2In turn place each driven plate on the surface plate; then using feeler gauge, measure warpage in several locations

AT THIS POINT
To service center crankcase components only, proceed to Separating Crankcase HalvesCC245D

Servicing Right-Side Components
NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual