2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 71Get this manual
8Unwind the rope from the reel and remove the ropeCleaning and Inspecting NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all components2Inspect the springs and ratchet for wear or damageB603D
3Inspect the reel and case for cracks or damage4Inspect the shaft for wear, cracks, or damage5Inspect the rope for breaks or fraying6Inspect the spiral spring for cracks, crystallization, or abnormal bends7Inspect the handle for damage, cracks, or deteriorationAssembling 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE: The spiral spring must seat evenly in the recoil case
5Carefully lift the reel free of the case making sure the spiral spring does not accidentally disengage from the case