2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 70Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 70

16Remove the Allen-head cap screws from the neutral switch base; then remove the switchAccount for the two contacts and springs B600D

! CAUTION

During the disassembly procedure, make sure all spring tension is released before continuing
2Remove the nut

AT THIS POINT
To service center crankcase components only, proceed to Removing Right-Side ComponentsB601D

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual