2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 50Get this manual

2008 Arctic Cat 400/500/650/700 ATV Service Manual, Page 50

2Remove the cap screws securing the valve cover to the head; account for the four rubber washers on the top side cap screwsRemove the valve coverAccount for and note the orientation of the cylinder head plug; then remove the plugNote the location of two alignment pins MD1251

5Bend the washer tabs and remove the two cap screw securing the sprocket to the camshaft

MD1354A

Back to 2008 Arctic Cat 400/500/650/700 ATV Service Manual