2008 Arctic Cat 366 ATV Service Manual, Page 124Get this manual
Suspension NOTE: Critical torque specifications are located in Section 1
Front A-Arms
REMOVING 1Secure the ATV on support stand to elevate the front wheels; then remove the wheels
Shock Absorbers
REMOVING 1Secure the ATV on support stand to elevate the wheels and to release load on the suspension
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injury
2Remove the cotter pin from the nutDiscard the cotter pin3Remove the nut securing the hub4Remove the brake caliperAccount for two cap screws
! WARNING
Make sure the ATV is solidly supported on the support stand to avoid injury
2Remove the two cap screws and nuts securing each front shock absorber to the frame and the upper A-armAccount for bushings and sleeves from each
! CAUTION
Additional support stands are necessary to support the rear axle when the shock absorbers are removed or damage may occur