2008 Arctic Cat 366 ATV Service Manual, Page 61Get this manual
4Place the pin into position on the oil pump shaft, install the oil pump driven gear making sure the recessed side of the gear is directed inward, and secure with new snap ringNOTE: Always use new snap ring when installing the oil pump driven gear
7Install the clutch shoe assembly on the crankshaft; then install the flange nut (left-hand thread) (coated with red Loctite #271)Tighten to 147 ft-lbNOTE: The flat side of the flange nut should be directed towards the clutch shoeMD1020
! CAUTION