2008 Arctic Cat 366 ATV Service Manual, Page 39Get this manual
CCylinder DPiston NOTE: Steps 1-11 in the preceding sub-section must precede this procedure
12Remove the two nuts securing the right side of the cylinder to the right-side crankcase half
15Using Piston Pin Puller, remove the piston pinAccount for the opposite-side circlipRemove the pistonNOTE: It is advisable to remove the opposite-side circlip prior to using the puller
MD1226A
13Lift the cylinder off the crankcase taking care not to allow the piston to drop against the crankcaseAccount for the gasket and two alignment pins