2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 86Get this manual

2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 86

2Remove the cotter pin, castle nut, and washer; then remove the hub assembly MD2132

8Remove the cap screws and self-locking nuts securing the A-arm to the frame
3Slide brake backing plate assembly off the spindle shaft and secure it out of the way4Remove the cotter pin from the outer tie rod end; then while holding the flat on the tie rod end, remove the castle nutAccount for washer

9Remove the A-arm

Back to 2007 Arctic Cat Y-12 90cc ATV Service Manual