2007 Arctic Cat Y-12 90cc ATV Service Manual, Page 85Get this manual
CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
INSTALLING REAR SHOCK ABSORBER
1Clean all shock absorber components2Inspect each shock rod for nicks, pits, rust, bends, and oily residue3Inspect all springs, spring retainers, shock rods, dampers, bushings, shock bodies, and eyelets for cracks, leaks, and bendsINSTALLING FRONT SHOCK ABSORBERS
1Place the spring preload adjuster and spring over the shock absorberCompress the spring and install the retainer2Place the shock absorber into position on the frame and swing arm and install the two cap screwsTighten the cap screws to specifications
1Place shock absorber into position on the frame and A-arm and install the two cap screws and self-locking nutsTighten the nuts to specificationsMD2314