2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 162Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 162

INSTALLING
1Connect the three-prong connector to the bulb socket; then place the taillight assembly into position on the rear canopy tube2Install the two torx-head screws and tighten securely

2Disconnect the three-prong connector from the bulb socket and remove the taillight assemblyINSPECTING

Back to 2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual