2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 142Get this manual

2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 142

10Remove the cap screws securing the A-arms to the frame AF616D

11Remove the circlip from the ball joint; then remove the ball joint from the A-arm
2Install the A-arm assemblies into the frame mounts and secure with the cap screwsOnly finger-tighten at this time
AF610D AF616D

3Route the brake hose through the upper A-arm shock absorber mount

Back to 2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual