2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 61Get this manual
COUNTERSHAFT
Assembling
! CAUTION
When disassembling the countershaft, care must be taken to note the direction each major component (dog, gear) facesIf major component is installed facing the wrong direction, transmission damage may occur andor the transmission will malfunctionIn either case, complete disassembly and assembly will be required
From the left side: 1Install the sliding dog (14), driven gear washer (13), and bushing (9)2Install bearing (8) and high driven gear (15); then install the left drive gear washer (16)From the right side: 1Install driven gear washer (13), bushing (9), bearing (8), and low driven gear (12)2Install lock washer (11), lock washer (10), washer (6), and bushing (9)3Install bearing (8), reverse driven gear (7), washer (6), and the circlip (4)
KEY 1234567891011
Countershaft Drive Gear #2 Reverse Driven Gear Dog Circlip Reverse Driven Gear Spacer Washer Reverse Driven Gear Bearing Bushing Lock Washer Lock Washer