2007 Arctic Cat Prowler/Prowler XT ATVs Service Manual, Page 44Get this manual
3Remove the shift shaft (H); then remove the two forks taking note of the direction of the tabs on the forks for assembling purposes4Remove the gear shift shaft (G) noting the location of the two holes on the end of the shaftAccount for two washers
7Note the timing marks on the crank balancer gear (B) and crankshaft gear (C) for assembling purposes; then slide the crank balancer gear off the crank balancerAccount for the key in the keyway
CD826 PR380A
8Remove the crank balancerNOTE: There is flat spot on the crank balancer bearing flange to allow clearance past the crankshaft