2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 131Get this manual
2Compress the reservoir clamp and remove the reservoir hose; then remove the union boltAccount for and discard two crush washers KM800B
4Using new crush washers, secure the brakeline hose to the master cylinder with the brakeline hose union boltTighten to specifications
3Remove the cotter pin from the clevis pin and remove the clevis pin; then remove the two cap screws securing the master cylinder to the frame and remove the master cylinder
5Fill the master cylinder with DOT brake fluid; then bleed the system (see Section 2)
Auxiliary Brake PedalMaster Cylinder Assembly
NOTE: Critical torque specifications are located in Section 10NOTE: The auxiliary brake master cylinder is non-serviceable component; it must be replaced as an assembly