2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 127Get this manual
4Install the six cap screws securing the body to the top of the frameTighten securely5Install the fuse block, start-in-gear relay, and the CDI; then install the body mounting cap screw into the bottom of the battery box6Install the battery and battery hold-down strap; then connect the positive battery cable and the negative battery cableNOTE: Always install the positive cable first; then install the negative cableKM788A
7Install the seat making sure it is latched securelyINSTALLING (Utility Model)
5Install the front center cover; then install the front and rear racksTighten all fasteners securely6Install the battery; then connect the positive battery cable, negative battery cable, and battery hold-down strapNOTE: Always install the positive cable first; then install the negative cable
1Place the front and rear fenders into position on the frame and secure with the existing hardware; then install the gas tank coverTighten all fasteners securely2Connect the headlight and taillight connectors; then install the shift knob3Making sure the locating tabs engage the appropriate slots in the fenders, install the side panels