2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 124Get this manual
2Support the front of the ATV with the wheels free to rotate; then center and secure the handlebar3Measure the distance (A) and (B) between the front wheels; then subtract distance (B) from (A)DistanceDistanceToe-In KM590
5Install the handlebar and tighten the cap screws to specifications making sure to tighten the front cap screws first
ATV2205
4Adjust toe-in to 15 mm (0.60 in; then measure distances (C) and (D)Distances (C) and (D) should be equal5After all the adjustments are to specifications, tighten the tie-rod lock nuts to specifications (see Section 10)KM587
NOTE: Prior to locking the jam nuts, make sure the ball joints are at the center of their normal range of motion and at the correct angleNOTE: The front wheels do not have to be removed to adjust the tie rodAlso, care should be taken not to disturb the handlebar position