2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 105Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 105


9From the left side, remove the pivot lock nut using Pivot Lock Nut Wrench (pn 0444-201); then remove the left pivot adjusting bolt
12Remove the eight cap screws securing the swing arm to the final drive gear case
KM513 KM533B

10Remove the swing arm assemblyAccount for the driveshaft spring

Back to 2007 Arctic Cat DVX/Utility 250 ATV Service Manual