2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 104Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 104


8Adjust the drive chain (see Section 2); then tighten the two cap screws9Install the wheel hubs and tighten the rear wheel hub nuts to specifications; then install the cotter pins and hub caps10Install the rear wheels and tighten to specifications
5Remove the rear drive gear case; then drain the gear case6Loosen the clamp securing the joint boot to the swing arm; then slip the boot off the swing arm
Rear Drive Axle
(Utility Model)
REMOVING

Back to 2007 Arctic Cat DVX/Utility 250 ATV Service Manual