2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 103Get this manual
NOTE: To aid in tightening the axle nuts, engage the brake lever lockNOTE: It is necessary to calculate the torque value using the following formula due to the offset of the special tool used to tighten the axle nuts 6Coat the axle threads with red Loctite #271 and install one axle nut (left-hand threads); then using the torque wrench adapter, tighten the inner axle nut to specificationsKM481
2Install the brake caliper holder; then install the circlip and cap screw and finger-tighten only
3Slide the axle into the axle housing from the right side; then apply multipurpose grease to all splined areas of the axle4Install the sprocket and sprocket hub on the axle and secure with the circlip; then install the drive chain