2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 98Get this manual
1Set the meter selector to the DC Voltage position2Connect the red tester lead to the brownblack wire; then connect the black tester lead to the green wire3With the ignition key in the LIGHTS position, the meter must show battery voltageNOTE: If the meter shows no voltage, inspect fuses, wiring harness, connectors, and switches 2Connect the red tester lead to the greenyellow wire; then connect the black tester lead to the green wire3With either brake applied, the meter must show battery voltageNOTE: If the meter shows no voltage, inspect fuses, wiring harness, connectors, and switches