2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 92Get this manual
Spark Plug Cap
TESTING
NOTE: If any functions (segments or displays) are not normal or do not display as indicated, the LCD gauge must be replaced
1Connect the red tester lead to one end of the cap; then connect the black tester lead to the other end of the cap
1Remove the instrument pod; then disconnect the speedometer cableLeave the gauge connected to the wiring harnessNOTE: To perform the following tests, two MaxiClips (pn 0744-041) and one jumper wire will be required
2Connect the black MaxiClip to the greenblack wire3Connect the red MaxiClip to the light greenred wire; then connect the jumper between the MaxiClips and turn the ignition switch to the ON positionThe neutral indicator light (9) must illuminate