2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 81Get this manual
3Position the carburetor in the air cleaner boot and intake pipe assembly; then secure with the clamps4Connect the hose at the gas tank valve connection5As necessary, secure the air-intake snorkel, the air cleaner housing cover, or the air cleaner housing6Install the seat; then turn the gas tank valve to the ON positionKM447
6Making sure the O-ring is properly positioned, place the float chamber into position; then secure with the Phillips-head screws7Place the O-ring into the carburetor; then install the diaphragm, spring, and housing cover and secure with two machine screwsTighten securely
Cleaning and Inspecting Carburetor
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
! WARNING
When drying components with compressed air, always wear safety glasses
! CAUTION
DO NOT place any non-metallic components in parts-cleaning solvent because damage or deterioration will resultKM443A