2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 80Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 80


NOTE: Note the locations of the jets, pilot screw, and needle jet holder for disassembling procedures
ASSEMBLING

1Thread the idle screw into the carburetor making sure the spring is properly positioned2Install the pilot screw with spring, washer, and O-ringNOTE: Turn the pilot screw clockwise until it is lightly seated; then turn it counterclockwise the recommended number of turns as an initial settingNOTE: Note the locations of the jets and needle jet holder during assembling procedures

Back to 2007 Arctic Cat DVX/Utility 250 ATV Service Manual