2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 61Get this manual
2Zero the indicator and push the small end of the connecting rod away from the dial indicator3Maximum deflection must not exceed specificationsMeasuring Connecting Rod (Big End Side-to-Side)
1Push the lower end of the connecting rod to one side of the crankshaft journalKM373
7Using suitable holding fixture, tighten the clutch nut to specifications
2Using feeler gauge, measure the gap between the connecting rod and crankshaft journal
Servicing Center Crankcase Components
NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessaryCC289D
CRANKSHAFT ASSEMBLY Measuring Connecting Rod (Small End Inside Diameter)
3Acceptable gap range must be within specificationsMeasuring Connecting Rod (Big End Width)