2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 60Get this manual
3Install the pins and spacers into the fixed face hub; then pack the cam slots in the movable face with multi-purpose grease KM378
7Measure the thickness of the centrifugal clutch shoe liningThe minimum service limit for the lining is 0.5 mm (0.020 inNOTE: If any shoe lining is below the service limit, the complete set must be replaced
4Install the spring seat over the hub and movable face hub
Assembling
1Place the fixed face of the driven pulley on the pulley compressor baseNOTE: Make sure the spacer is on the base or damage to the fixed face will occur when the spring is compressed