2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 57Get this manual
NOTE: Increasing the rotations in step 10 will increase spring tension
2Inspect the face surfaces of the fixed and movable drive faces for grooving, nicks, or discoloration
12Place the recoil starter assembly into position on the left-side cover; then tighten the cap screws to specificationsV-BELT COVER
1Inspect the bearing for excessive wear, rough or binding when turning, seal condition, and secure mounting in the V-belt coverNOTE: If the bearing is worn excessively, turns roughly, or bearing seals are loose, the bearings must be replacedKM394A