2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 56Get this manual
3Apply low-temperature grease to the spring and hub4Thread the end of the rope through the guide hole of the case; then thread the rope through the handle and washer and secure it with double knotInstall the protective cover into the handle KM397A
7Install the spacer, spring, and the ratchet guide making sure the ratchet pins engage the guide
8Hold the ratchet guide down in place on the ratchet pins and secure with the cap screw coated with blue Loctite #243Tighten securelyKM405