2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 40Get this manual
Left-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-section
3On the Utility model using suitable holder to prevent the drive pulley from turning, remove the drive face nut and starter ratchet; then remove the drive pulley face
NOTE: The enginetransmission does not have to be removed from the frame for this procedure
Removing Left-Side Components
ARecoil Starter (Utility Model)
1Remove the five recoil starter cover cap screwsRemove the recoil starter assembly noting the location of the dowel pinsNote the condition of the recoil cover gasketReplace if damaged