2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 27Get this manual

2007 Arctic Cat DVX/Utility 250 ATV Service Manual, Page 27


4Remove the nut securing the movable drive face; then remove the faceAccount for the stepped washer and spacer
3Install the movable drive face onto the crankshaft making sure to "bottom" the sheave out against the center bushingThe crankshaft splines should be visible and the stepped washer should sit over the splines

5Remove the nut securing the driven pulley; then remove the splined bushing, centrifugal clutch, pulley, and V-beltINSTALLING

Back to 2007 Arctic Cat DVX/Utility 250 ATV Service Manual