2007 Arctic Cat ATVs factory service and repair manual, Page 334Get this manual
Installing Right-Side Components 1Install the shift indicator sending unit making sure the two neutral contact pins and the two springs are properly positionedTighten the Allen-head screws securely
4Lightly grease the clutch housing seal; then insert the primary drive spacer
2Using new O-ring, install the oil jet in the right side of the crankcase
3Install the clutch shoe assembly and secure with the washer (with the flat side facing the assembly as noted in removing) and the nut (threads coated with red Loctite #271)Tighten to specifications
A CAUTION