2007 Arctic Cat ATVs factory service and repair manual, Page 258Get this manual
Servicing Center Crankcase Components H NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance, replacement is necessary
SECONDARY GEARS
H NOTE: When checking and correcting secondary gear backlash and tooth contactl the universal joint must be secured to the front shaft or false measurements will occur
A CAUTION
The clutch hub and the pressure plate must be seated in the proper positionIf any of the incorrect positions are used, the hub and plate will have clearance between them and they will not operate properlyH NOTE: The primary clutch assembly is now completely assembled for installation
Checking Backlash
H NOTE: The rear shaft and bevel gear must be removed for this procedureAlso, aliays start with the original shims on the rear shaft
INSPECTING OIL PUMP