2007 Arctic Cat ATVs factory service and repair manual, Page 177Get this manual
i 12Remove the snap ring securing the water pump drive sear: then remove the sear notins the direction of the sides of the gear for installing purposesAccount for the drive gear alignment pin
B AT THIS POINT To service the magneto assembly, see Section 513Remove the snap ring securing the water pump driven gear; then remove the gear noting the direction of the sides of the sear for installins purposesAccount for the driven gear alignment pin
11Remove the two starter gears from the crankcase noting the direction of the beveled side of the gears for installing purposes; then remove the two starter gear shafts