2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 393Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 393

REMOVING
1Remove the left-side engine cover; then disconnect the three-wire TPS connector plug
4Turn the ignition switch to the ON position and note the position of the TPS indicator icon (A, B, or C); then adjust the TPS until the TPS icon appears in the center position (B)

2Remove the two screws securing the TPS to the throttle body and remove the TPSINSTALLINGADJUSTING

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual