2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 354Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 354

REMOVING
1Turn the ignition switch to the OFF position; then remove the ignition switch key
! WARNING
Do not turn the ignition switch to the ON position with the hoses removedGasoline will be pumped by the electric fuel pump causing safety hazard
2Disconnect the battery; then remove the seatCC743

6Position the carburetor in the air cleaner boot and intake pipe assembly; then secure with the clamps7Connect the hose from the carburetor to the gas tank8As necessary, secure the air-intake snorkel, the air cleaner housing cover, or the air cleaner housing9Install the seat
3Remove the storage compartment cover and air filter housing cover; then remove the air filter4Loosen the clamp securing the air filter housing boot to the throttle body inlet; then remove the boot from the throttle body(700 EFI)

Electronic Fuel Injection

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual