2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 320Get this manual
AssemblingInstalling
1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedNOTE: The spiral spring must seat evenly in the recoil case
7Install the friction spring and the spring coverB606D
2Insert the rope through the hole in the reel and tie knot in the end; then wrap the rope counterclockwise around the reel leaving approximately 50 cm (20 in of rope free of the reel3Apply low-temperature grease to the spring and hub4Thread the end of the rope through the guide hole of the case; then thread the rope through the handle and secure it with double knotInstall the protective cover into the handle5Align the inner hook of the spiral spring with the notch in the reel