2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 302Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 302

3Remove the three cap screws securing the water pump to the engine; then remove the water pump FI185A

5Remove the starter torque limiterAccount for two washers, one bushing, and the shaftFI141A

AT THIS POINT
To service the water pump, see Section 4
4Remove the cap screws securing the left-side cover to the crankcase noting the location of the engine ground cap screw for installing purposes; then remove the left-side coverAccount for gasket and two alignment pins

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual