2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 273Get this manual
2Place the strainer cap into position on the strainer making sure new O-ring is properly installed and secure with the cap screws; then install and tighten the oil drain plug to specifications CC095D
7In crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 3-4) until the halves are correctly joined; then tighten to specificationsNOTE: Rotate the shafts back and forth to ensure no binding or sticking occursCC091D
8In crisscrosscase-to-case pattern, tighten the mm cap screws (from steps 5-6) to specificationsNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs
3Place the oil pump into position in the crankcase and secure with the three Phillips-head screws coated with blue Loctite #243Tighten to specifications