2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 250Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 250


2Rotate the camshaft and note runout; maximum tolerance must not exceed specificationsMeasuring Camshaft Lobe Height

2Place strip of plasti-gauge in each of the camshaft lands in the cylinder head3Place the valve cover on the cylinder head and secure with the valve cover cap screwsTighten securelyNOTE: Do not rotate the camshaft when measuring clearance
1Using calipers, measure each cam lobe height
4Remove the cap screws securing the valve cover to the cylinder; then remove the valve cover and camshaft
ATV1013A

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual