2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 246Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 246

2Acceptable outside diameter range must be within specificationsInstalling Valves
1Apply grease to the inside surface of the valve seals; then place lower spring seat and valve guide seal over each valve guide

PISTON ASSEMBLY
NOTE: Whenever piston, rings, or pin are out of tolerance, they must be replaced
CleaningInspecting Piston

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual