2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 239Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 239


21Remove the three Phillips-head screws securing the oil pump; then remove the oil pumpNOTE: It may be necessary to use an impact driver to loosen the screws
AT THIS POINT
To service center crankcase components only, proceed to Separating Crankcase Halves
Center Crankcase Components
NOTE: This procedure cannot be done with the enginetransmission in the frameComplete Removing procedures for Top-Side, Left-Side, and Right-Side must precede this procedureNOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment

Back to 2007 Arctic Cat ATVs 400/500/650/700 Service Manual