2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 116Get this manual
26Remove the engine from the left side by moving the engine forward while raising the engine in the rear and rotating the engine clockwiseThe engine will come out the left side of the frame Top-Side Components
NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to be addressed and to service only those componentsThe technician should use discretion and sound judgment
NOTE: Keep the mounting hardware with the covers for assembly purposes
AT THIS POINT
To service any one specific component, only limited disassembly of components may be necessaryNote the AT THIS POINT information in each sub-sectionNOTE: The enginetransmission does not have to removed from the frame for this procedure
2Remove the 12 valve cover cap screwsNote the rubber washers on the four top-side cap screws; remove the valve coverNote the orientation of the cylinder head plug and remove itNote the location of the two alignment pins