2007 Arctic Cat 700 Diesel ATV Service Manual, Page 146Get this manual
2Inspect all threads for stripping or damage3Inspect the brake disc for cracks or warping4Inspect the hub for pits, cracks, loose studs, or spline wearINSTALLING 1Secure the brake disc to the hub with the four cap screws coated with blue Loctite #243Tighten to specifications2Apply grease to the splines in the hubPR243A
6Tighten the hub nut (from step 4) to specifications; then install and spread new cotter pin making sure each side of the pin is flush to the hub nut