2007 Arctic Cat 700 Diesel ATV Service Manual, Page 93Get this manual
22Repeat steps 15-21 for the second piston23Install the oil pump (see Section 4)24Install the water pump (see Section 4)25Install the cylinder head (see Top-Side Components in this section)26Cover the ends of the lateral seals with RTV Silicone; then place new oil pan gasket in place making sure to properly align the gasket with the oil sump and return galleys
28Secure the oil pan with the Allen-head cap screws and the two hollow studs and spacers making sure to install the two hollow studs at the outside corners on the crankshaft pulley side; then using crisscross pattern, tighten to specifications
29If the oil pan cover was removed, place two new gaskets onto the oil pan; then install the oil pan cover and secure with the Allen-head cap screwsTighten in crisscross pattern to specificationsDE440B