2007 Arctic Cat 700 Diesel ATV Service Manual, Page 47Get this manual
! CAUTION The valve cover and gasket are important components in the lubrication systemImproper installation will result in severe engine damage
15Connect the fuel supply and return hoses to the fuel rail16Connect the crankcase breather to the valve cover; then connect the oil pressure switch connector to the oil pressure switchDE534B
17Move the ATV outside or to well ventilated area; then turn the ignition switch to the ON position and prime the fuel system by pumping the manual primer pump until pressure is felt on the handleDE405A
14Place small bead of high-temperature sealant on the fuel rail seal; then carefully install the valve cover with new gasket and oil return bootTighten to specifications