2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 104Get this manual
Handlebar Grip REMOVING
1Using compressed air nozzle and low pressure, peel up the inner corner of the grip2Apply air pressure while twisting the grip back and forth until it slides off the handlebarMD2426
5Apply light coat of grease to spindle shaft; then install the brake backing plate assembly onto the spindle shaftNOTE: When installing the brake backing plate assembly, be sure to align the notch in the backing plate with the tab on the steering knuckle
INSPECTING
NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessaryMD2381