2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 100Get this manual
1Wash the tie rod ends in parts-cleaning solventDry with compressed airInspect the pivot area for wearApply low-temperature grease to the ends 3Install the inner tie rod endsTighten the nuts to specifications and install new cotter pins
! WARNING
Always wear safety glasses when using compressed air
2Inspect the tie rods for damaged threads or wear3Inspect the tie rods for cracks or unusual bends4Inspect all welded areas for cracks or deterioration5Inspect the steering post and brackets for cracks, bends, or wear6Inspect the plastic bearing halves and bearing caps for cracks or wear7Inspect the handlebar tube for cracks, wear, or unusual bendsINSTALLING
4Route the control cables and wiring through the metal loop on the steering post