2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 79Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 79

5Install the intermediate gear and the gear reduction case cover gasketAccount for the two dowel pins on the cover and install the cover using five Allen-head cap screwsTighten to specifications MD2071

7Slide the driven clutch assembly over the input shaft

NOTE: The two long cap screws are installed in the same holes as the dowel pins

Back to 2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual