2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 76Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 76

Reduction Gears and Driven Clutch NOTE: The enginetransmission must removed for this procedure (see Section 3)be

2Remove the 28 mm nut securing the driven clutch components
! WARNING
There is spring between the outer section of the driven clutch assembly and the inner sheavesCare must be taken when removing the 28 mm nut to relieve spring tension gradually
DISASSEMBLING

1Remove the 10 mm nut securing the outer drum of the driven clutchAccount for the O-ringThe clutch will now slide off as unit

Back to 2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual