2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 53Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 53

45Install outer drum over the driven clutch assemblySecure with the flange nut tightened to specifications DSC02307

DSC02314

46Install the starter motor into the left-side crankcaseTighten the two cap screws to specifications
DSC02308

49Spread the sheaves of the driven clutch by grasping the movable sheave tightly and pulling out toward the clutch; then while holding the sheaves apart, push the drive belt to the center of the driven clutchDSC02306

47Install the starter one-way gear
DSC02314

Back to 2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual