2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 47Get this manual

2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual, Page 47

DSC02259
NOTE: Make sure the rings rotate freely and the ring gaps are separated by 120 as illustrated
DSC00100

20Install one of the piston pin circlips into one side of the piston with the opening directed toward the skirt or the domeNOTE: When installing the circlips, compress them just enough to installDo not over-compress the circlips
DSC00100

22Apply engine oil to the piston and the cylinder wallDSC02253

Back to 2006 Arctic Cat Y-6/Y-12 50cc and 90cc Service Manual